Carboguard 635 Data Sheet - Galvanizing requires a roughened surface for optimum adhesion/performance of high build epoxies. User must contact carboline company to verify correctness before specifying or ordering. Web carboguard 635 july 2008 replaces october 2007 to the best of our knowledge the technical data contained herein is true and accurate on the date of publication and is subject to change without prior notice. 2 (6 mils/coat) cure between coats: Can be used direct to metal as a corrosion resistant primer, an intermediate coating over itself and many. It may also be used for immersion in fresh or salt water (marine) exposures. Web it is suitable for both maintenance and new construction projects due to its excellent surface wetting characteristics and quick cure for handling. Web it is suitable for both maintenance and new construction projects due to its excellent surface wetting characteristics and quick cure for handling. 220°f (104°c) potable water use limitations at 75°f. 12 mils # of coats:
Web it is suitable for both maintenance and new construction projects due to its excellent surface wetting characteristics and quick cure for handling. It may also be used for immersion in fresh or salt water (marine) exposures. 2 (6 mils/coat) cure between coats: Can be used direct to metal as a corrosion resistant primer, an intermediate coating over itself and many. Web carboguard 635 july 2008 replaces october 2007 to the best of our knowledge the technical data contained herein is true and accurate on the date of publication and is subject to change without prior notice. Web it is suitable for both maintenance and new construction projects due to its excellent surface wetting characteristics and quick cure for handling. 12 mils # of coats: User must contact carboline company to verify correctness before specifying or ordering. >3,000 gal (tank) carboguard® 635. It may also be used for immersion in fresh or salt water (marine) exposures. No guarantee of accuracy is given or implied. Galvanizing requires a roughened surface for optimum adhesion/performance of high build epoxies. 220°f (104°c) potable water use limitations at 75°f.